6081623_Sub TWU 4.08-05-DM-C

6049347

Sub TWU 4.02-20-DM-C

WILO SE

350

Multistage 4" submersible pump in jacketed construction for vertical and horizontal installation

Fully submersible, multistage submersible pump with radial or semi-axial impellers in sectional construction for vertical or horizontal installation, with built-in non-return valve. Corrosion-free single-phase or three-phase AC motor for direct starting with water-glycol filling. Hermetically sealed with enamel-insulated windings, resin-impregnated and self-lubricating bearings. The motor is cooled by the pumped fluid. Therefore, the unit must always be operated immersed. Horizontal installation must be performed in conjunction with a cooling jacket. For pumping water out of boreholes with a maximum immersion depth of 200 m and a max. sand content of 50 g/m³. Scope of delivery: *Hydraulics + motor completely assembled *Connection cable approved for drinking water *Single-phase version including switchbox with capacitor, thermal motor protection and On/Off switch *Installation and operating instructions

Sub TWU 4.02-20-DM-C

EC010343

Stainless steel

X5CrNi18-10

PPE

6049349

Sub TWU 4.04-07-DM-C

WILO SE

350

Multistage 4" submersible pump in jacketed construction for vertical and horizontal installation

Fully submersible, multistage submersible pump with radial or semi-axial impellers in sectional construction for vertical or horizontal installation, with built-in non-return valve. Corrosion-free single-phase or three-phase AC motor for direct starting with water-glycol filling. Hermetically sealed with enamel-insulated windings, resin-impregnated and self-lubricating bearings. The motor is cooled by the pumped fluid. Therefore, the unit must always be operated immersed. Horizontal installation must be performed in conjunction with a cooling jacket. For pumping water out of boreholes with a maximum immersion depth of 200 m and a max. sand content of 50 g/m³. Scope of delivery: *Hydraulics + motor completely assembled *Connection cable approved for drinking water *Single-phase version including switchbox with capacitor, thermal motor protection and On/Off switch *Installation and operating instructions

Sub TWU 4.04-07-DM-C

EC010343

Stainless steel

X5CrNi18-10

PPE

6049351

Sub TWU 4.04-14-DM-C

WILO SE

350

Multistage 4" submersible pump in jacketed construction for vertical and horizontal installation

Fully submersible, multistage submersible pump with radial or semi-axial impellers in sectional construction for vertical or horizontal installation, with built-in non-return valve. Corrosion-free single-phase or three-phase AC motor for direct starting with water-glycol filling. Hermetically sealed with enamel-insulated windings, resin-impregnated and self-lubricating bearings. The motor is cooled by the pumped fluid. Therefore, the unit must always be operated immersed. Horizontal installation must be performed in conjunction with a cooling jacket. For pumping water out of boreholes with a maximum immersion depth of 200 m and a max. sand content of 50 g/m³. Scope of delivery: *Hydraulics + motor completely assembled *Connection cable approved for drinking water *Single-phase version including switchbox with capacitor, thermal motor protection and On/Off switch *Installation and operating instructions

Sub TWU 4.04-14-DM-C

EC010343

Stainless steel

X5CrNi18-10

PPE

6049353

Sub TWU 4.04-27-DM-C

WILO SE

350

Multistage 4" submersible pump in jacketed construction for vertical and horizontal installation

Fully submersible, multistage submersible pump with radial or semi-axial impellers in sectional construction for vertical or horizontal installation, with built-in non-return valve. Corrosion-free single-phase or three-phase AC motor for direct starting with water-glycol filling. Hermetically sealed with enamel-insulated windings, resin-impregnated and self-lubricating bearings. The motor is cooled by the pumped fluid. Therefore, the unit must always be operated immersed. Horizontal installation must be performed in conjunction with a cooling jacket. For pumping water out of boreholes with a maximum immersion depth of 200 m and a max. sand content of 50 g/m³. Scope of delivery: *Hydraulics + motor completely assembled *Connection cable approved for drinking water *Single-phase version including switchbox with capacitor, thermal motor protection and On/Off switch *Installation and operating instructions

Sub TWU 4.04-27-DM-C

EC010343

Stainless steel

X5CrNi18-10

PPE

6049355

Sub TWU 4.04-44-DM-C

WILO SE

350

Multistage 4" submersible pump in jacketed construction for vertical and horizontal installation

Fully submersible, multistage submersible pump with radial or semi-axial impellers in sectional construction for vertical or horizontal installation, with built-in non-return valve. Corrosion-free single-phase or three-phase AC motor for direct starting with water-glycol filling. Hermetically sealed with enamel-insulated windings, resin-impregnated and self-lubricating bearings. The motor is cooled by the pumped fluid. Therefore, the unit must always be operated immersed. Horizontal installation must be performed in conjunction with a cooling jacket. For pumping water out of boreholes with a maximum immersion depth of 200 m and a max. sand content of 50 g/m³. Scope of delivery: *Hydraulics + motor completely assembled *Connection cable approved for drinking water *Single-phase version including switchbox with capacitor, thermal motor protection and On/Off switch *Installation and operating instructions

Sub TWU 4.04-44-DM-C

EC010343

Stainless steel

X5CrNi18-10

PPE

6081625

Sub TWU 4.08-10-DM-C

WILO SE

350

Multistage 4" submersible pump in jacketed construction for vertical and horizontal installation

Fully submersible, multistage submersible pump with radial or semi-axial impellers in sectional construction for vertical or horizontal installation, with built-in non-return valve. Corrosion-free single-phase or three-phase AC motor for direct starting with water-glycol filling. Hermetically sealed with enamel-insulated windings, resin-impregnated and self-lubricating bearings. The motor is cooled by the pumped fluid. Therefore, the unit must always be operated immersed. Horizontal installation must be performed in conjunction with a cooling jacket. For pumping water out of boreholes with a maximum immersion depth of 200 m and a max. sand content of 50 g/m³. Scope of delivery: *Hydraulics + motor completely assembled *Connection cable approved for drinking water *Single-phase version including switchbox with capacitor, thermal motor protection and On/Off switch *Installation and operating instructions

Sub TWU 4.08-10-DM-C

EC010343

Stainless steel

X5CrNi18-10

PPE

6081627

Sub TWU 4.08-21-DM-C

WILO SE

350

Multistage 4" submersible pump in jacketed construction for vertical and horizontal installation

Fully submersible, multistage submersible pump with radial or semi-axial impellers in sectional construction for vertical or horizontal installation, with built-in non-return valve. Corrosion-free single-phase or three-phase AC motor for direct starting with water-glycol filling. Hermetically sealed with enamel-insulated windings, resin-impregnated and self-lubricating bearings. The motor is cooled by the pumped fluid. Therefore, the unit must always be operated immersed. Horizontal installation must be performed in conjunction with a cooling jacket. For pumping water out of boreholes with a maximum immersion depth of 200 m and a max. sand content of 50 g/m³. Scope of delivery: *Hydraulics + motor completely assembled *Connection cable approved for drinking water *Single-phase version including switchbox with capacitor, thermal motor protection and On/Off switch *Installation and operating instructions

Sub TWU 4.08-21-DM-C

EC010343

Stainless steel

X5CrNi18-10

PPE

6081629

Sub TWU 4.08-34-DM-C

WILO SE

350

Multistage 4" submersible pump in jacketed construction for vertical and horizontal installation

Fully submersible, multistage submersible pump with radial or semi-axial impellers in sectional construction for vertical or horizontal installation, with built-in non-return valve. Corrosion-free single-phase or three-phase AC motor for direct starting with water-glycol filling. Hermetically sealed with enamel-insulated windings, resin-impregnated and self-lubricating bearings. The motor is cooled by the pumped fluid. Therefore, the unit must always be operated immersed. Horizontal installation must be performed in conjunction with a cooling jacket. For pumping water out of boreholes with a maximum immersion depth of 200 m and a max. sand content of 50 g/m³. Scope of delivery: *Hydraulics + motor completely assembled *Connection cable approved for drinking water *Single-phase version including switchbox with capacitor, thermal motor protection and On/Off switch *Installation and operating instructions

Sub TWU 4.08-34-DM-C

EC010343

Stainless steel

X5CrNi18-10

PPE

6081631

Sub TWU 4.08-45-DM-C

WILO SE

350

Multistage 4" submersible pump in jacketed construction for vertical and horizontal installation

Fully submersible, multistage submersible pump with radial or semi-axial impellers in sectional construction for vertical or horizontal installation, with built-in non-return valve. Corrosion-free single-phase or three-phase AC motor for direct starting with water-glycol filling. Hermetically sealed with enamel-insulated windings, resin-impregnated and self-lubricating bearings. The motor is cooled by the pumped fluid. Therefore, the unit must always be operated immersed. Horizontal installation must be performed in conjunction with a cooling jacket. For pumping water out of boreholes with a maximum immersion depth of 200 m and a max. sand content of 50 g/m³. Scope of delivery: *Hydraulics + motor completely assembled *Connection cable approved for drinking water *Single-phase version including switchbox with capacitor, thermal motor protection and On/Off switch *Installation and operating instructions

Sub TWU 4.08-45-DM-C

EC010343

Stainless steel

X5CrNi18-10

PPE